Pentax Hidrotank H1 Automatic Pump Controller

Maximum pump power: 2 HP

1 to 3.5 bars

Reviews
  • Quality Guarantee
  • Technical Advice
  • After Sales Service

To inquire about the price, contact the experts of Famco

Overview of Pentax Hidrotank H1 Automatic Pump Controller

Pentax Hidrotank H1 automatic pump controller controls single-phase pumps up to 2 HP and protects them against overheating. The traditional pressure adjustment set, including pressure switch and pressure tank, can be replaced by this controller. It can switch the pump on and off according to water usage.

Related Products

Pentax Hidrotank H1 Automatic Pump Controller Specification

Pentax Hidrotank H1 automatic pump controller has a maximum pressure of 10 bars. The maximum rated current for this automatic pump controller is 12 A. The electric board is protected against water and can be replaced in case of need. The maximum liquid temperature Pentax Hidrotank H1 automatic pump controller can tolerate is 35 °C. This controller set can be installed horizontally or vertically according to the water flow.

Pentax Hidrotank Automatic Pump Controller

 

When the pressure decreases, the controller is set to control the process of pump’s working, switching it on to start supplying water (as the taps open). It switches the pump off when the water flow interrupts at the maximum pressure level (as the taps close).

Pentax Hidrotank H1 automatic pump controller is equipped with a built-in 0.4 tank and a pressure gauge. There will be no water hammer phenomenon if this controller is installed. The starting pressure can be adjusted during the installation and ranges from 1 to 3.5 bars. No maintenance is needed for this controller.

Pentax HIDROTANK H2 Automatic Pump Controller Pressure Diagram

The following diagram represents the amount of pressure drop as a function of water flow rate.

Pentax Hidrotank H1 Automatic Pump Controller Diagram

Pentax HIDROTANK H2 Automatic Pump Controller Components

The figure below shows different parts of this automatic pump controller:

Pentax Hidrotank H1 Automatic Pump Controller Components

  1. Inlet connection
  2. Outlet connection
  3. Power indicator
  4. Pump status indicator
  5. Error indicator (dry-running)
  6. Reset button
  7. Pressure gauge
  8. Power connection
  9. Pump connection
  10. Pressure adjustment screw
  11. Tank pre-charge valve
  12. Pre-charge pressure gauge (optional)

Pentax HIDROTANK H2 Automatic Pump Controller Dimensions

Pentax Hidrotank H1 Automatic Pump Controller Dimensions

 

Pentax HIDROTANK H2 Automatic Pump Controller Features and benefits

  • Automatic start/stop
  • Best replacement of traditional water system sets
  • Adjustable starting pressure while the installation
  • No maintenance is needed

 

You can buy Pentax Hidrotank H1 automatic pump controller and other pump accessories at Famcocorp, where our experts provide you with thorough technical advice. You can also check Pentax Hidrotank H1 automatic pump controller user manual for further information.

Pentax Hidrotank H1 Automatic Pump Controller Price List

No Name Price
1 Pentax Hidrotank H1 automatic pump controller Contact us
Starting Pressure (bar)

Brand

Country

Maximum Liquid Temperature (°C)

Number of Phases

Max Current (A)

Pressure Tank Volume (L)

Starting Pressure (psi)

Degree of Protection

Frequency (Hz)

Voltage (V)

,

Maximum Power (HP)

Cable

Inlet/Outlet Angle (degrees)

Inlet Fitting Size (inch)

Outlet Fitting Size (inch)

Pressure Gauge

Pressure (bar)

Pressure (psi)

Reviews

There are no reviews yet.

Be the first to review “Pentax Hidrotank H1 Automatic Pump Controller”

Your email address will not be published. Required fields are marked *

2 × one =