Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump

Overview of Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump

Sea land JAP 150 M self-priming centrifugal pump is designed for clean water extraction from wells with a minimum diameter of 4 inches. These pumps are effective for depths ranging from 10 meters to 50 meters. There are some key features such as axial intake, upward-facing radial delivery, and high suction capacity properly installed with an ejector body.

Technical specifications include a maximum flow rate of approximately 3.6 m³/h, a maximum head of around 50 meters, and components such as a cast iron pump body, stainless steel shaft, and carbon-ceramic mechanical seal. The motor type is asynchronous, squirrel cage-type, and closed, with motor protection incorporated for single-phase models. Three-phase models require external protection .

You can check the specifications of Sea land JAP 150 self-priming centrifugal deep suction pump on this page.

How does Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump Work?

Sea land JAP 150 M self-priming pump is a centrifugal deep suction water pump, designed to pull water from depths that regular pumps can’t reach. Unlike submersible pumps that sit directly in the water source, Sea land JAP 150 M self-priming pump stays on the surface. Here’s the magic:

• The Ejector Trick: It uses a clever device called an ejector. This Venturi-shaped nozzle uses the flow of water from the pump to create a low-pressure zone. This negative pressure at the ejector inlet “sucks” in water from the well, even at significant depths (up to 10 meters for the JAP 150 M). Once the water enters the ejector, it mixes with the pressurized water from the pump, and together they get pushed out at a higher pressure.
• Centrifugal Force Takes Over: Once primed with water, the JAP 150 M functions like a regular centrifugal pump. The spinning impeller inside the pump housing uses centrifugal force to fling water outwards, increasing the pressure and allowing it to be delivered to your desired location.
• Surface-Mounted Convenience: Because it stays on the surface, the JAP 150 M is easier to install and maintain compared to submersible pumps. It’s ideal for situations where submerging a pump isn’t feasible, like wells with limited access or those containing dirty water that could damage a submersible pump.

Exclusive Features and Benefits Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump

Sea land JAP 150 M is distinguished by its high suction capability, able to pull water from depths of up to 10 meters, making it suitable for wells with low water tables or those requiring deeper suction. This contrasts with the shallower depths typical of regular centrifugal pumps, enhancing its effectiveness in challenging conditions. Additionally, the JAP 150 M features a self-priming operation thanks to its ejector system, which automates the priming process and eliminates the need for manual intervention, ensuring a smooth and hassle-free start-up.

Furthermore, Sea land JAP 150’s surface-mounted design offers several benefits over submersible pumps. Its surface placement simplifies installation and maintenance, as the pump remains easily accessible for inspections, repairs, or cleaning. This design also protects the pump from potential damage caused by dirty water, abrasive elements, or overheating, which are common issues for submerged pumps. Constructed with a robust cast iron pump body, stainless steel shaft, and a durable Noryl (or bronze) impeller, the JAP 150 M ensures long-lasting performance even in demanding applications.

Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump Installation and Usage

To install the sea land JAP 150 M self-priming centrifugal deep suction pump:

• Base Setup: Securely place the pump on a flat, stable surface.
• Pipe Connections: Attach and align the suction and discharge pipes.
• Priming: Pour water into the pump casing to facilitate self-priming.
• Alignment: Ensure proper alignment between the pump and motor.
• Electrical Wiring: Connect the motor to the electrical supply according to safety guidelines.
• Initial Run: Test the pump, checking for leaks and smooth operation.

Usage:

• Water Supply Systems: For pumping water from wells, tanks, or reservoirs to residential or industrial facilities.
• Irrigation: In agriculture, for distributing water to fields and crops.
• Fire Fighting: As a backup or primary pump for fire protection systems.
• Construction: For dewatering excavations or construction sites.
• Industrial Processes: In manufacturing or processing plants where water or other liquids need to be moved efficiently.
• Mining: For dewatering and transferring water in mining operations.

Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump Components

• Motor: Sea land JAP 150 M self-priming water pump is powered by an electric motor, typically single-phase or three-phase depending on the model.
• Pump Housing: Encasing the impeller and other internal components, the pump housing is typically made of cast iron for durability and resistance to corrosion.
• Impeller: This rotating component with vanes is the heart of the centrifugal pump action. The JAP 150 M impeller, often made of Noryl or bronze, spins at high speed, drawing water in and flinging it outwards using centrifugal force. This increases the pressure of the water.
• Ejector: This is the key component that differentiates the JAP 150 M from regular centrifugal pumps. The ejector is a Venturi-shaped nozzle that uses pressurized water from the pump to create a low-pressure zone.
• Diffuser: Located downstream of the impeller, the diffuser is a conical shaped component that helps convert the high velocity of the water exiting the impeller into increased pressure.
• Mechanical Seal: This vital component creates a watertight barrier between the rotating pump shaft and the stationary pump housing, preventing leaks.
• Shaft: The JAP 150 M typically uses a stainless steel shaft for strength and corrosion resistance.

Important tips for buying Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump

• Capacity: Ensure it meets your flow rate and pressure requirements.
• Material: Choose materials compatible with the fluids you’ll be pumping.
• Power: Verify the motor’s power rating matches your energy supply.
• Self-priming: Check that it effectively handles your specific suction conditions.
• Durability: Look for quality construction and reliable brand reputation.
• Maintenance: Ensure easy access to parts and service support.
• Price: You can check Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump price on Famcocorp website.

You can buy Sea land JAP 150 M self-priming centrifugal deep suction pump online from Famcocorp.

 

Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump Price List

No.	Name	Price
1	Sea land JAP 150 M Self-priming Centrifugal Deep Suction Pump Price	Contact us