Dab Esybox Booster Pump

Dab Esybox Booster Pump Specification

Dab Esybox automatic booster pump uses wireless technology and can connect up to 4 pumps simultaneously. It is equipped with an inverter for enhanced performance. Dab Esybox automatic booster system has a remote controller based on DConnect service. It’s super easy to put together a two-pump booster set, thanks to Esytwin’s quick-connect dock.

Dab Esybox automatic booster pump with inverter can be installed, vertically or horizontally. Note that the noise and vibrations are reduced to a minimum of 45 dB in standard applications. The maximum flow rate and delivery head for this booster system are 120 l/min (7.2 m3/h) and 65 meters, respectively. This Dab Pump can operate on the maximum pressure of 8 bars.

 

 

 

Dab Esybox Booster Pump Performance Curve

The performance curve illustrates the hydraulic behavior of the Dab E.sybox booster pump under varying flow and pressure conditions. This data provides a clear representation of how the unit delivers water across different system demands and helps ensure precise pump selection for residential and commercial applications

• The performance curve is for the kinematic viscosity of 1 mm2/s and density of 1000 kg/m3
• Its tolerance is based on ISO 9906

Dab Esybox Booster Pump Parts and Materials

Dab Esybox booster pump with inverter is provided with the top-quality materials. Below is an overview of the principal parts and typical materials used in the E.sybox system.

N°	Parts	Materials
1	Motor flange	Technopolymer
2	Rotor shaft	AISI 303 stainless steel
3	Motor jacket	AISI 304 stainless steel
5	O-ring gasket	NBR
7	Sintered plate	AISI 304 stainless steel
11	1″ plug	Technopolymer
13	Suction body	Technopolymer
14	1” insert	Nickeled brass
15	Shutter	Technopolymer
17	Spring	AISI 303 stainless steel
20	Diffuser	Technopolymer
21	Diffuser body	Technopolymer
22	Impeller	Technopolymer
22c	Shim ring	AISI 316 stainless steel
24	Nut	AISI 316 stainless steel
25	Diffuser end plug	Technopolymer
27	Mechanical seal	Carbon-impregnated resin/Silicon carbide/EPDM
28	Pump body	Technopolymer
30	Discharge body	Technopolymer
36	Flow switch body	Technopolymer
41	Impeller	Technopolymer
46	Discharge manifold	Technopolymer
47	1¼” plug	Technopolymer
52	Check valve	Technopolymer/Rubber/Steel
57	Tank	Technopolymer/Rubber
58.1	Pressure sensor body	Technopolymer

 

Dab Esybox Booster Pump Accessories

Dab Esydock, Esywall, and Esytwin are the three options for Dab Esybox automatic booster pump. Additionally, Esywall is a kit containing screws, dwells, brackets, and two accessories for vibration absorption. Below are the options and fittings that improve the efficiency of this booster system even more.

	Esydock Esydock facilitates a quick and easier installation as it offers four different possibilities for configuration. Esydock has all the required interfaces to connect to the system. Dimensions: 18x29x32 cm
	Esytwin The backup function makes it possible for Esytwin to ensure the required water supply. According to its compact size, it has superior performance compared to other traditional systems. Dimensions: 23x75x35 cm
	Esytwin Double Connection Kit Two-inch T-manifolds for suction and delivery can be connected to 2 Esytwin to create a 4-pump Esybox system. Two 1¼” nipples for each manifold Two 1¼” female, and 2″ male reductions Three 2″ 3-piece connectors One 2″ female T-connector
	Esytank Esytank can be integrated into the system. It is equipped with Esydock (for easy connection), suction hose with check valve, overflow, filling valve with float valve, flow connection, and inspection plug. The capacity is 500 liters.
	Esytank Auxiliary Cistern Esytank is not supplied with any fittings or Esydock. The tank can be easily connected to other Esytank units to increase the capacity. By using the coupling kit, it can be connected on both sides and the rear.
	Esytank Coupling Kit One PVC sleeve with gasket: D=160 mm, L=150 Two PVC pipes: D=50 mm, L=60 One connecting ring nut to create a two-pump system
	Esytank Optional Delivery Kit It consists of a 1″ polypropylene pipe. It can link several Esytank units and Esybox systems together.
	1¼” inlet and outlet fittings

 

Features and Benefits of Dab Esybox Booster Pump

• Flexible and compact in size
• Wireless technology
• Remote control
• Easily installed in both vertical or horizontal position

Applications of Dab Esybox Booster Pump

• Residential purposes
• Small industrial uses
• Rainwater reuses

You can buy Dab Esybox automatic booster system at Famcocorp, the reliable supplier in Dubai. For more information, please check Dab automatic Esybox booster system user guide.