Pentax CMT214 Three Phase Single-impeller Centrifugal Pump

Overview of Pentax CMT214 Three Phase Single-impeller Centrifugal Pump

The Pentax CMT214 could be a strong three-phase single-impeller centrifugal pump planned for a assortment of applications, counting residential, respectful, and mechanical settings. It is known for its amazingly calm operation and capacity to preserve consistent weight in spite of shifting stream rates. With a most extreme stream rate of 120 liters per miniature and a head greatest of 50 meters, this pump is appropriate for clean water as it were and ought to not be utilized for rough applications.

Its development highlights incorporate a cast press pump body, Noryl or brass impeller, and ceramic-graphite-NBR seal, guaranteeing solidness and unwavering quality. The pump’s engine could be a 2 posts acceptance engine, with an separator course of F and a assurance degree of IPX4, highlighting its productivity and security guidelines.

You can review the specifications of Pentax CMT214 Three Phase Single-impeller Centrifugal Pump on this page.

How does Pentax CMT214 Three Phase Single-impeller Centrifugal Pump work?

The Pentax CMT214 is a single-impeller centrifugal pump, designed to move large volumes of water quickly and efficiently. Here is how it works:

1. The pump is connected to a power source, such as an electric motor, which drives the impeller at high speeds.
2. As the impeller spins, it creates a vacuum effect at the center of the pump, drawing water in through the inlet located at the center of the impeller.
3. The spinning impeller then forces the water outward towards the edges of the pump housing, increasing its pressure and velocity.
4. The water is then forced out through the outlet of the pump and into the desired system, such as a water distribution network or irrigation system.
5. The single impeller design of the Pentax CMT214 ensures a continuous flow of water without any interruptions, allowing for efficient operation and minimal maintenance requirements.

Exclusive features and benefits of Pentax CMT214 Three Phase Single-impeller Centrifugal Pump

• Versatile Applications: It’s suitable for domestic, civil, and industrial uses, ensuring a wide range of functionality.
• Quiet Operation: The pump is designed to operate extremely quietly, minimizing noise pollution and making it ideal for environments where noise is a concern.
• Constant Pressure: It guarantees constant pressure despite the variation of flow rates, which is crucial for consistent performance in systems requiring stable water pressure.
• High Flow Rate: With a maximum flow rate of 120 liters per minute, it can handle significant volumes of water, making it efficient for larger systems.
• Substantial Head Maximum: The pump has a head maximum of 50 meters, providing the necessary pressure for higher elevation applications.
• Durable Construction: The pump body is made of cast iron, and the impeller is available in Noryl or brass, offering long-lasting durability and resistance to wear.
• Efficient Motor: It features a 2 poles induction motor with an insulation class of F and a protection degree of IPX4, highlighting its energy efficiency and safety standards.
• Temperature Range: The pump can handle ambient temperatures with the Noryl impeller from 0 – 50 °C and with the brass impeller from 0 – 90 °C, accommodating a variety of environmental conditions.
• Pressure Capability: It can withstand a pump body gasket pressure of up to 6 bar (45-100) and 8 bar (164-550), suitable for high-pressure requirements.

Pentax CMT214 Three Phase Single-impeller Centrifugal Pump installation and usage

To install this type of Pentax CMT centrifugal pump, begin by ensuring that the installation site is level and stable. Next, connect the pump to the power source according to the manufacturer’s instructions. Make sure to follow all safety precautions when working with electricity. Install the pump in a location that allows for easy access for maintenance and repair.

Next, connect the inlet and outlet pipes to the pump using appropriate fittings and seals to prevent leaks. The pipes should be sized according to the pump’s specifications to ensure optimal performance. Once the pipes are securely connected, prime the pump by filling the casing with water until it is full. This will help the pump to operate efficiently and prevent damage from dry running. Finally, turn on the power to the pump and monitor its operation to ensure that it is functioning correctly.

Here are some of its key applications and features:

• Water supply and distribution
• Irrigation
• Pressure boosting
• Cooling and heating systems
• Industrial applications

Pentax CMT214 Three Phase Single-impeller Centrifugal Pump components

• Motor
• Pump body
• Impeller
• Shaft
• Bearings
• Motor bracket

Important tips for buying Pentax CMT214 Three-Phase Single-impeller Centrifugal Pump

• Consider the stream rate and head necessities of your particular application some time recently choosing a pump show.
• Check the fabric of development of the pump to guarantee compatibility with the fluid being pumped.
• Make beyond any doubt the pump is appropriately measured for your framework to dodge issues with execution and proficiency.
• Consider the control supply prerequisites and guarantee that the pump is consistent with the electrical framework at your location.
• Check the pump’s specialized determinations, counting greatest stream rate, head, and engine control, to guarantee it meets the prerequisites of your application.
• Compare costs from different providers to ensure you’re getting the most excellent bargain on the Pentax CMT214 pump. You can check Pentax pumps price on Famcocorp website.

You can buy Pentax CMT214 three-stage single-impeller centrifugal pump online from Famcocorp.

 

Pentax CMT214 Three Phase Single-impeller Centrifugal Pump Price List

No.	Name	Price
1	Pentax CMT214 three-stage single-impeller centrifugal pump price	Contact us