Ebara CDA 5.50T Twin-impeller Cast Iron Centrifugal Pump

Overview of the Ebara CDA 5.50T Twin-impeller Cast Iron Centrifugal Pump

The Ebara CDA pump is a centrifugal pump that uses an impeller to spin water, creating a centrifugal force that pushes the water out of the pump. Twin-impeller design provides increased pumping capacity. The CDA 5.50T is made of cast iron, making it durable and long-lasting.

How does the Ebara CDA 5.50T Twin-impeller Cast Iron Centrifugal Pump Work?

Centrifugal water pump use a rotating impeller to create suction at the inlet of the pump, which draws liquid in. As the impeller rotates, it transfers energy to the liquid, increasing its velocity and pressure. The liquid is then forced out of the pump through the outlet. The twin-impeller design of the CDA 5.50T allows for higher flow rates than a single-impeller pump.

Exclusive Features and Benefits of the Ebara CDA 5.50T Twin-impeller Cast Iron Centrifugal Pump

• Suitable for clean water and non-aggressive liquids: The Ebara CDA pump can be used for a wide range of applications, including transferring domestic water, sprinkler systems, irrigation, and industrial process liquids.
• Durable cast iron construction: The cast iron construction of the CDA pump makes it resistant to corrosion and wear, ensuring long-lasting performance.
• Maximum working pressure of 10 bar: The CDA pump can handle high pressure applications, making it suitable for a variety of demanding tasks.
• Maximum temperature of +90°C: The CDA pump can handle hot liquids up to +90°C, making it suitable for a variety of industrial applications.
• Twin-impeller design: The twin-impeller design provides increased flow rates compared to single-impeller pumps.

Ebara CDA 5.50T Twin-impeller Cast Iron Centrifugal Pump Installation and Usage

The Ebara CDA pump is easy to install and use. It is important to consult the installation manual for specific instructions, but generally, the pump should be installed on a level surface in a well-ventilated location. The pump should be piped to the water source and discharge using compatible piping materials. Once the pump is installed, it can be started by filling the pump casing with water and turning on the power.

Ebara CDA 5.50T Twin-impeller Cast Iron Centrifugal Pump Components

The Ebara CDA pump consists of the following main components:

• Impeller: The impeller is the rotating component that creates suction and pressure to move water.
• Pump casing: The pump casing houses the impeller and provides a sealed chamber for the water.
• Motor: The motor drives the impeller to rotate.
• Shaft: The shaft connects the motor to the impeller.
• Seals: The seals prevent leaks between the pump casing and the shaft.

Important Tips for Buying an Ebara CDA 5.50T Twin-impeller Cast Iron Centrifugal Pump

• Consider the application: Choose a pump that is sized appropriately for your specific needs. Consider the flow rate and pressure required for your application.
• Material compatibility: Ensure that the pump is made of materials that are compatible with the liquids you will be pumping.
• Working pressure and temperature: Make sure the pump can handle the maximum working pressure and temperature of your application.
• Electrical requirements: Ensure that the pump’s electrical requirements are compatible with your power supply.
• Warranty: Choose a pump that comes with a warranty to ensure you are covered in case of any defects.

By following these tips, you can ensure that you select the right Ebara CDA pump for your needs.