Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump

Overview of Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump

The Ebara 3DP 40-125/2.2 is a cast-iron centrifugal pump designed for efficient handling of clean water and similar non-aggressive liquids. It’s part of Ebara’s broader 3D series of standardized pumps. This pump features a robust construction with a cast iron casing and a stainless steel impeller for durability. The impeller is specifically a closed centrifugal type, well-suited for this pump’s range. Additionally, the Ebara 3DP 40-125/2.2 comes equipped with a mechanical seal, further enhancing its reliability.

This pump is designed for versatility with a maximum working pressure of 10 bar and a temperature range of -5°C to +90°C, although some variations can handle hotter liquids. It’s also energy efficient, exceeding the Minimum Energy Index (MEI) of 0.4. Furthermore, the back pull-out design allows for easy maintenance without disturbing the piping.

You can check the specification of Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump on this page.

How does Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump work?

This model of Ebara 3DP pumps utilizes a rotating component called an impeller to transfer energy to the liquid it’s pumping. The impeller is housed within a volute, a spiral-shaped chamber that directs the flow of the liquid. As the electric motor spins the impeller, its blades push against the liquid. This creates a pressurized zone near the center of the impeller and a low-pressure zone around its edges.

This pressure difference draws liquid into the pump inlet (usually located at the center of the pump casing) and forces it out of the discharge outlet (typically positioned at the periphery of the volute). The volute’s design converts the kinetic energy imparted by the impeller into pressure, resulting in a controlled flow of liquid at the pump’s outlet. Essentially, the Ebara 3DP 40-125/2.2 uses centrifugal force generated by the spinning impeller to efficiently move clean water.

Exclusive features and benefits of Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump

The Ebara 3DP 40-125/2.2 Cast-Iron Centrifugal Pump is a marvel of engineering, offering a host of exclusive features and benefits that set it apart from the competition.

• Firstly, the pump is built to last. Its sturdy construction, made of cast iron, provides excellent stress resistance. The impeller, made of AISI 304 and AISI 316 steel, ensures durability, making this pump a reliable choice for long-term use.
• Secondly, the pump is designed for high efficiency. It operates with high-efficiency motors, and for motors ranging from 7.5kW to 22kW, they are rated to IE3 standards. This means you can expect optimal performance and energy savings in the long run.
• Thirdly, the pump features a back pull-out design. This user-friendly design allows the motor, coupling, bracket, and impeller to be removed without compromising the pump body or disassembling the piping. This feature makes maintenance and repair tasks easier and more efficient, saving you time and effort.
• Lastly, the pump offers versatility and adaptability. It can handle a wide range of temperatures and is suitable for various applications, including heating and air conditioning systems, water supply, pressurisation, fire-fighting systems, industrial liquid handling systems, irrigation, and washing systems. Plus, it offers many types of mechanical seals that can be mounted on the electric pumps, allowing the use of special materials. This adaptability makes it suitable for different needs based on the type of liquid, temperature, or other factors of use. The pump is available in three versions – 3D SERIES monoblock with extended shaft, 3DS SERIES with rigid coupling and IEC Standard motor, and 3DP SERIES with elastic coupling and IEC Standard motor. This gives you the flexibility to choose the version that best suits your specific needs.

Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump installation and usage

For safe installation of your Ebara 3DP 40-125/2.2:

• Read the manual first.
• Turn off power and isolate the pump.
• Pick a clean, level spot with enough space.
• Prepare pipes, valves (consider isolation valves), and maybe a foundation (check manual).
• Install pipes with proper tightening and leak prevention.
• Have a qualified electrician connect the power per the manual and regulations.
• Fill the pump and prime it (check manual for specifics).
• Visually check for leaks, then do a test run for proper operation and noise.
• Test your whole system for desired flow and pressure.

 Usage:

• Water supply
• Pressure boosting
• Washing systems in industrial plants
• Water circulation in air conditioning systems
• Irrigation in agriculture

Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump components

The Ebara 3DP 40-125/2.2 cast-iron centrifugal pump includes the following main components:

• Pump Casing: Encloses the internal components and directs fluid flow.
• Impeller: Rotates to impart kinetic energy to the fluid.
• Pump Shaft: Transfers mechanical energy from the motor to the impeller.
• Motor: Drives the pump shaft and impeller.
• Mechanical Seal: Prevents fluid leakage between the pump shaft and casing.
• Volute: Converts the velocity of the fluid into pressure.
• Diffuser: Guides the fluid from the impeller to the volute.
• Bearing Assembly: Supports the pump shaft and ensures smooth operation.
• Discharge and Suction Flanges: Connect the pump to the piping system.

Important tips for buying Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump

• Check Specifications: Ensure the pump meets your flow rate and head requirements.
• Verify Material Compatibility: Confirm that cast-iron construction is suitable for your fluid’s properties.
• Review Efficiency Ratings: Look for high efficiency to minimize operating costs.
• Inspect Warranty and Support: Check for manufacturer warranty and available technical support.
• Consider Maintenance Needs: Ensure you can easily access replacement parts and service.
• Evaluate Size and Installation Requirements: Verify the pump fits your space and installation setup.
• Check Energy Consumption: Assess power requirements for cost-effective operation.
• Budget: You can check Ebara pumps prices on Famcocorp website

You can buy Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump online from Famcocorp.

 

Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump Price List

No.	Name	Price
1	Ebara 3DP 40-125/2.2 Cast-iron Centrifugal Pump Price	Contact us